· Firmware. Firmware is the actual code that runs your printer. It starts as human-readable code, which defines the logic (i.e. how the printer is supposed to act given certain circumstances), is compiled into machine-readable code, then is uploaded to the memory on the controller board where it senses input and reacts according to the logic defined in the code.
Changing your 3D printer firmware can be a tricky. Learn the pros and cons of changing it, how to change it, and the most common firmware choices.
For the 3D printer, the firmware is responsible for understanding the G-Code sent by the slicer and translate it to the stepper drivers which control the motors, at the same time it control the temperature, flow, acceleration, speed, and more things. What are the options? Today we have a lot of options to choose from, but we will talk of the two most used (and best) Repetier. The Repetier ...
A few words first: This page is dedicating to upgrading/updating your marlin firmware for your 3D printer. Here we will also show what settings to use for Scalar XL 3D printers, but the main idea stay the same for any other printers. Be advised however that the philosophy can be slightly different for Delta 3D […]
One being firmware, Second being computer/printer interface, third being in 3D modeling software and the fourth being the slicing engine. G-code is a great place to start as that is the main driver for the machine. I would recommend looking at firmware for a 32bit controller as the 8bit in my opinion is a dying technology. Here is a link to the smoothie board firmware
High-quality Resin 3D Printers at Attractive Prices. Shop Now!
Easy Return · Safe & Secure · Free & Fast Shipping · 30 Day Money-Back
A grouch is a person who somehow can manage to find something wrong with even the good old days.